From b05719949bc8f146323e75f045939a434e745589 Mon Sep 17 00:00:00 2001 From: Ivan Stefanov Date: Sat, 30 Oct 2021 01:51:11 +0300 Subject: [PATCH] Added Lesson 7 plan Upload additional Timer Register setup demos 2Hz/10kHz @ 25/50/80% --- .../Timer_PWM_10kHz_D25.ino | 23 + .../Timer_PWM_10kHz_D50.ino | 23 + .../Timer_PWM_2Hz_D25/Timer_PWM_2Hz_D25.ino | 23 + .../Timer_PWM_2Hz_D80/Timer_PWM_2Hz_D80.ino | 23 + Lesson_Plans/Lesson7.md | 41 ++ Lesson_Plans/Lesson7.txt | 32 ++ Other Useful Files/mega_pins_arduino.h | 413 ++++++++++++++++++ Other Useful Files/uno_nano_pins_arduino.h | 254 +++++++++++ 8 files changed, 832 insertions(+) create mode 100644 Examples/Timer_PWM_10kHz_D25/Timer_PWM_10kHz_D25.ino create mode 100644 Examples/Timer_PWM_10kHz_D50/Timer_PWM_10kHz_D50.ino create mode 100644 Examples/Timer_PWM_2Hz_D25/Timer_PWM_2Hz_D25.ino create mode 100644 Examples/Timer_PWM_2Hz_D80/Timer_PWM_2Hz_D80.ino create mode 100644 Lesson_Plans/Lesson7.md create mode 100644 Lesson_Plans/Lesson7.txt create mode 100644 Other Useful Files/mega_pins_arduino.h create mode 100644 Other Useful Files/uno_nano_pins_arduino.h diff --git a/Examples/Timer_PWM_10kHz_D25/Timer_PWM_10kHz_D25.ino b/Examples/Timer_PWM_10kHz_D25/Timer_PWM_10kHz_D25.ino new file mode 100644 index 0000000..636d6cc --- /dev/null +++ b/Examples/Timer_PWM_10kHz_D25/Timer_PWM_10kHz_D25.ino @@ -0,0 +1,23 @@ +// Timer 1 - Mode 14 +// f = 10kHz ; δ = 25% + +void setup() { + + DDRB |= (1 << PB1); + + // Zero + TCCR1A = 0; + TCCR1B = 0; + + // Set stuff + TCCR1A |= (1 << WGM11) | (1 << COM1A1); + TCCR1B |= (1 << WGM13) | (1 << WGM12); + ICR1 = 1599; // Period (TOP) + OCR1A = 400; // Duty cycle + TCCR1B |= (1 << CS10); + +} + +void loop() { + +} diff --git a/Examples/Timer_PWM_10kHz_D50/Timer_PWM_10kHz_D50.ino b/Examples/Timer_PWM_10kHz_D50/Timer_PWM_10kHz_D50.ino new file mode 100644 index 0000000..6b60731 --- /dev/null +++ b/Examples/Timer_PWM_10kHz_D50/Timer_PWM_10kHz_D50.ino @@ -0,0 +1,23 @@ +// Timer 1 - Mode 14 +// f = 10kHz ; δ = 50% + +void setup() { + + DDRB |= (1 << PB1); + + // Zero + TCCR1A = 0; + TCCR1B = 0; + + // Set stuff + TCCR1A |= (1 << WGM11) | (1 << COM1A1); + TCCR1B |= (1 << WGM13) | (1 << WGM12); + ICR1 = 1599; // Period (TOP) + OCR1A = 800; // Duty cycle + TCCR1B |= (1 << CS10); + +} + +void loop() { + +} diff --git a/Examples/Timer_PWM_2Hz_D25/Timer_PWM_2Hz_D25.ino b/Examples/Timer_PWM_2Hz_D25/Timer_PWM_2Hz_D25.ino new file mode 100644 index 0000000..ca156da --- /dev/null +++ b/Examples/Timer_PWM_2Hz_D25/Timer_PWM_2Hz_D25.ino @@ -0,0 +1,23 @@ +// Timer 1 - Mode 14 +// f = 2Hz ; δ = 25% + +void setup() { + + DDRB |= (1 << PB1); + + // Zero + TCCR1A = 0; + TCCR1B = 0; + + // Set stuff + TCCR1A |= (1 << WGM11) | (1 << COM1A1); + TCCR1B |= (1 << WGM13) | (1 << WGM12); + ICR1 = 31249; // Period (TOP) + OCR1A = 7812; // Duty cycle + TCCR1B |= (1 << CS12); + +} + +void loop() { + +} diff --git a/Examples/Timer_PWM_2Hz_D80/Timer_PWM_2Hz_D80.ino b/Examples/Timer_PWM_2Hz_D80/Timer_PWM_2Hz_D80.ino new file mode 100644 index 0000000..4698a58 --- /dev/null +++ b/Examples/Timer_PWM_2Hz_D80/Timer_PWM_2Hz_D80.ino @@ -0,0 +1,23 @@ +// Timer 1 - Mode 14 +// f = 2Hz ; δ = 80% + +void setup() { + + DDRB |= (1 << PB1); + + // Zero + TCCR1A = 0; + TCCR1B = 0; + + // Set stuff + TCCR1A |= (1 << WGM11) | (1 << COM1A1); + TCCR1B |= (1 << WGM13) | (1 << WGM12); + ICR1 = 31249; // Period (TOP) + OCR1A = 25000; // Duty cycle + TCCR1B |= (1 << CS12); + +} + +void loop() { + +} diff --git a/Lesson_Plans/Lesson7.md b/Lesson_Plans/Lesson7.md new file mode 100644 index 0000000..3f8147c --- /dev/null +++ b/Lesson_Plans/Lesson7.md @@ -0,0 +1,41 @@ +# --- Тема 7 --- + +## План на часа +- Напомняне за примерите в GitLab и плановете от часовете който качвам там +- Таймери + * Как работи таймера (разглеждане на блоковата схема на Timer/Counter 1) + * Режими на работа (За какво се използват) + * Настройка (избор на режим, задаване на режима чрез запис в регистрите и изчисляване на параметри) + * Примерни задачи + 1. мигащ светодиод - Mode 14 Fast PWM 2Hz 25% + 2. мигащ светодиод - Mode 14 Fast PWM 2Hz 80% + 3. мигащ светодиод - Mode 14 Fast PWM 10kHz 25% + +- С 12Б клас също(12А може да го видите в последните 10-15мин на записа от часа с 12Б клас на 29.10.2021): +Демонстрация на получения 10kHz сигнал на осцилоскоп и логически анализатор +Сравняване на заданието с получените параметри на сигнала + +### Допълнително: +https://maxembedded.com/2011/07/avr-timers-ctc-mode/ (тук е обяснен как работи CTC режима който ние няма да използваме, но голяма част от обясненията и най-вече примерния код с който се подкарва таймера са много близки до това което правим в час и ако го разгледате няма да навреди) +https://onlinedocs.microchip.com/pr/GUID-93DE33AC-A8E1-4DD9-BDA3-C76C7CB80969-en-US-2/index.html?GUID-669CCBF6-D4FD-4E1D-AF92-62E9914559AA +(тук пише как работи Prescaler-а ако някой го интересува по-подробно) + +Timer Calculators Online: +(https://eleccelerator.com/avr-timer-calculator/) (това е калкулатора който исках да ви покажа) +https://www.easycalculation.com/engineering/electrical/avr-timer-calculator.php +https://weirdloop.com/2019/07/11/avr-timer-calculator/ +https://www.arduinoslovakia.eu/application/timer-calculator +https://timer-interrupt-calculator.simsso.de/ +https://sayanseth.github.io/AVR-Clock-Calculator/ +https://www.mikroe.com/timer-calculator +(на последния линк долу има и разни други интересни програмки, +като например за рисуване на символи за custom LCD fonts) + + +- точка нещо си +[ime](link) +```C++ + // code +``` + +`ne6to` \ No newline at end of file diff --git a/Lesson_Plans/Lesson7.txt b/Lesson_Plans/Lesson7.txt new file mode 100644 index 0000000..f296550 --- /dev/null +++ b/Lesson_Plans/Lesson7.txt @@ -0,0 +1,32 @@ +#--- Тема 7 --- + +## План на часа +Напомняне за примерите в GitLab и плановете от часовете който качвам там +Таймери + Как работи таймера (разглеждане на блоковата схема на Timer/Counter 1) + Режими на работа (За какво се използват) + Настройка (избор на режим, задаване на режима чрез запис в регистрите и изчисляване на параметри) + Примерни задачи + - мигащ светодиод - Mode 14 Fast PWM 2Hz 25% + - мигащ светодиод - Mode 14 Fast PWM 2Hz 80% + - мигащ светодиод - Mode 14 Fast PWM 10kHz 25% + +С 12Б клас също(12А може да го видите в последните 10-15мин на записа от часа с 12Б клас на 29.10.2021): +Демонстрация на получения 10kHz сигнал на осцилоскоп и логически анализатор +Сравняване на заданието с получените параметри на сигнала + +### Допълнително: +https://maxembedded.com/2011/07/avr-timers-ctc-mode/ (тук е обяснен как работи CTC режима който ние няма да използваме, но голяма част от обясненията и най-вече примерния код с който се подкарва таймера са много близки до това което правим в час и ако го разгледате няма да навреди) +https://onlinedocs.microchip.com/pr/GUID-93DE33AC-A8E1-4DD9-BDA3-C76C7CB80969-en-US-2/index.html?GUID-669CCBF6-D4FD-4E1D-AF92-62E9914559AA +(тук пише как работи Prescaler-а ако някой го интересува по-подробно) + +Timer Calculators Online: +https://eleccelerator.com/avr-timer-calculator/ (това е калкулатора който исках да ви покажа) +https://www.easycalculation.com/engineering/electrical/avr-timer-calculator.php +https://weirdloop.com/2019/07/11/avr-timer-calculator/ +https://www.arduinoslovakia.eu/application/timer-calculator +https://timer-interrupt-calculator.simsso.de/ +https://sayanseth.github.io/AVR-Clock-Calculator/ +https://www.mikroe.com/timer-calculator +(на последния линк долу има и разни други интересни програмки, +като например за рисуване на символи за custom LCD fonts) \ No newline at end of file diff --git a/Other Useful Files/mega_pins_arduino.h b/Other Useful Files/mega_pins_arduino.h new file mode 100644 index 0000000..5115c04 --- /dev/null +++ b/Other Useful Files/mega_pins_arduino.h @@ -0,0 +1,413 @@ +/* + pins_arduino.h - Pin definition functions for Arduino + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2007 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA +*/ + +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include + +#define NUM_DIGITAL_PINS 70 +#define NUM_ANALOG_INPUTS 16 +#define analogInputToDigitalPin(p) ((p < 16) ? (p) + 54 : -1) +#define digitalPinHasPWM(p) (((p) >= 2 && (p) <= 13) || ((p) >= 44 && (p)<= 46)) + +#define PIN_SPI_SS (53) +#define PIN_SPI_MOSI (51) +#define PIN_SPI_MISO (50) +#define PIN_SPI_SCK (52) + +static const uint8_t SS = PIN_SPI_SS; +static const uint8_t MOSI = PIN_SPI_MOSI; +static const uint8_t MISO = PIN_SPI_MISO; +static const uint8_t SCK = PIN_SPI_SCK; + +#define PIN_WIRE_SDA (20) +#define PIN_WIRE_SCL (21) + +static const uint8_t SDA = PIN_WIRE_SDA; +static const uint8_t SCL = PIN_WIRE_SCL; + +#define LED_BUILTIN 13 + +#define PIN_A0 (54) +#define PIN_A1 (55) +#define PIN_A2 (56) +#define PIN_A3 (57) +#define PIN_A4 (58) +#define PIN_A5 (59) +#define PIN_A6 (60) +#define PIN_A7 (61) +#define PIN_A8 (62) +#define PIN_A9 (63) +#define PIN_A10 (64) +#define PIN_A11 (65) +#define PIN_A12 (66) +#define PIN_A13 (67) +#define PIN_A14 (68) +#define PIN_A15 (69) + +static const uint8_t A0 = PIN_A0; +static const uint8_t A1 = PIN_A1; +static const uint8_t A2 = PIN_A2; +static const uint8_t A3 = PIN_A3; +static const uint8_t A4 = PIN_A4; +static const uint8_t A5 = PIN_A5; +static const uint8_t A6 = PIN_A6; +static const uint8_t A7 = PIN_A7; +static const uint8_t A8 = PIN_A8; +static const uint8_t A9 = PIN_A9; +static const uint8_t A10 = PIN_A10; +static const uint8_t A11 = PIN_A11; +static const uint8_t A12 = PIN_A12; +static const uint8_t A13 = PIN_A13; +static const uint8_t A14 = PIN_A14; +static const uint8_t A15 = PIN_A15; + +// A majority of the pins are NOT PCINTs, SO BE WARNED (i.e. you cannot use them as receive pins) +// Only pins available for RECEIVE (TRANSMIT can be on any pin): +// (I've deliberately left out pin mapping to the Hardware USARTs - seems senseless to me) +// Pins: 10, 11, 12, 13, 50, 51, 52, 53, 62, 63, 64, 65, 66, 67, 68, 69 + +#define digitalPinToPCICR(p) ( (((p) >= 10) && ((p) <= 13)) || \ + (((p) >= 50) && ((p) <= 53)) || \ + (((p) >= 62) && ((p) <= 69)) ? (&PCICR) : ((uint8_t *)0) ) + +#define digitalPinToPCICRbit(p) ( (((p) >= 10) && ((p) <= 13)) || (((p) >= 50) && ((p) <= 53)) ? 0 : \ + ( (((p) >= 62) && ((p) <= 69)) ? 2 : \ + 0 ) ) + +#define digitalPinToPCMSK(p) ( (((p) >= 10) && ((p) <= 13)) || (((p) >= 50) && ((p) <= 53)) ? (&PCMSK0) : \ + ( (((p) >= 62) && ((p) <= 69)) ? (&PCMSK2) : \ + ((uint8_t *)0) ) ) + +#define digitalPinToPCMSKbit(p) ( (((p) >= 10) && ((p) <= 13)) ? ((p) - 6) : \ + ( ((p) == 50) ? 3 : \ + ( ((p) == 51) ? 2 : \ + ( ((p) == 52) ? 1 : \ + ( ((p) == 53) ? 0 : \ + ( (((p) >= 62) && ((p) <= 69)) ? ((p) - 62) : \ + 0 ) ) ) ) ) ) + +#define digitalPinToInterrupt(p) ((p) == 2 ? 0 : ((p) == 3 ? 1 : ((p) >= 18 && (p) <= 21 ? 23 - (p) : NOT_AN_INTERRUPT))) + +#ifdef ARDUINO_MAIN + +const uint16_t PROGMEM port_to_mode_PGM[] = { + NOT_A_PORT, + (uint16_t) &DDRA, + (uint16_t) &DDRB, + (uint16_t) &DDRC, + (uint16_t) &DDRD, + (uint16_t) &DDRE, + (uint16_t) &DDRF, + (uint16_t) &DDRG, + (uint16_t) &DDRH, + NOT_A_PORT, + (uint16_t) &DDRJ, + (uint16_t) &DDRK, + (uint16_t) &DDRL, +}; + +const uint16_t PROGMEM port_to_output_PGM[] = { + NOT_A_PORT, + (uint16_t) &PORTA, + (uint16_t) &PORTB, + (uint16_t) &PORTC, + (uint16_t) &PORTD, + (uint16_t) &PORTE, + (uint16_t) &PORTF, + (uint16_t) &PORTG, + (uint16_t) &PORTH, + NOT_A_PORT, + (uint16_t) &PORTJ, + (uint16_t) &PORTK, + (uint16_t) &PORTL, +}; + +const uint16_t PROGMEM port_to_input_PGM[] = { + NOT_A_PIN, + (uint16_t) &PINA, + (uint16_t) &PINB, + (uint16_t) &PINC, + (uint16_t) &PIND, + (uint16_t) &PINE, + (uint16_t) &PINF, + (uint16_t) &PING, + (uint16_t) &PINH, + NOT_A_PIN, + (uint16_t) &PINJ, + (uint16_t) &PINK, + (uint16_t) &PINL, +}; + +const uint8_t PROGMEM digital_pin_to_port_PGM[] = { + // PORTLIST + // ------------------------------------------- + PE , // PE 0 ** 0 ** USART0_RX + PE , // PE 1 ** 1 ** USART0_TX + PE , // PE 4 ** 2 ** PWM2 + PE , // PE 5 ** 3 ** PWM3 + PG , // PG 5 ** 4 ** PWM4 + PE , // PE 3 ** 5 ** PWM5 + PH , // PH 3 ** 6 ** PWM6 + PH , // PH 4 ** 7 ** PWM7 + PH , // PH 5 ** 8 ** PWM8 + PH , // PH 6 ** 9 ** PWM9 + PB , // PB 4 ** 10 ** PWM10 + PB , // PB 5 ** 11 ** PWM11 + PB , // PB 6 ** 12 ** PWM12 + PB , // PB 7 ** 13 ** PWM13 + PJ , // PJ 1 ** 14 ** USART3_TX + PJ , // PJ 0 ** 15 ** USART3_RX + PH , // PH 1 ** 16 ** USART2_TX + PH , // PH 0 ** 17 ** USART2_RX + PD , // PD 3 ** 18 ** USART1_TX + PD , // PD 2 ** 19 ** USART1_RX + PD , // PD 1 ** 20 ** I2C_SDA + PD , // PD 0 ** 21 ** I2C_SCL + PA , // PA 0 ** 22 ** D22 + PA , // PA 1 ** 23 ** D23 + PA , // PA 2 ** 24 ** D24 + PA , // PA 3 ** 25 ** D25 + PA , // PA 4 ** 26 ** D26 + PA , // PA 5 ** 27 ** D27 + PA , // PA 6 ** 28 ** D28 + PA , // PA 7 ** 29 ** D29 + PC , // PC 7 ** 30 ** D30 + PC , // PC 6 ** 31 ** D31 + PC , // PC 5 ** 32 ** D32 + PC , // PC 4 ** 33 ** D33 + PC , // PC 3 ** 34 ** D34 + PC , // PC 2 ** 35 ** D35 + PC , // PC 1 ** 36 ** D36 + PC , // PC 0 ** 37 ** D37 + PD , // PD 7 ** 38 ** D38 + PG , // PG 2 ** 39 ** D39 + PG , // PG 1 ** 40 ** D40 + PG , // PG 0 ** 41 ** D41 + PL , // PL 7 ** 42 ** D42 + PL , // PL 6 ** 43 ** D43 + PL , // PL 5 ** 44 ** D44 + PL , // PL 4 ** 45 ** D45 + PL , // PL 3 ** 46 ** D46 + PL , // PL 2 ** 47 ** D47 + PL , // PL 1 ** 48 ** D48 + PL , // PL 0 ** 49 ** D49 + PB , // PB 3 ** 50 ** SPI_MISO + PB , // PB 2 ** 51 ** SPI_MOSI + PB , // PB 1 ** 52 ** SPI_SCK + PB , // PB 0 ** 53 ** SPI_SS + PF , // PF 0 ** 54 ** A0 + PF , // PF 1 ** 55 ** A1 + PF , // PF 2 ** 56 ** A2 + PF , // PF 3 ** 57 ** A3 + PF , // PF 4 ** 58 ** A4 + PF , // PF 5 ** 59 ** A5 + PF , // PF 6 ** 60 ** A6 + PF , // PF 7 ** 61 ** A7 + PK , // PK 0 ** 62 ** A8 + PK , // PK 1 ** 63 ** A9 + PK , // PK 2 ** 64 ** A10 + PK , // PK 3 ** 65 ** A11 + PK , // PK 4 ** 66 ** A12 + PK , // PK 5 ** 67 ** A13 + PK , // PK 6 ** 68 ** A14 + PK , // PK 7 ** 69 ** A15 +}; + +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { + // PIN IN PORT + // ------------------------------------------- + _BV( 0 ) , // PE 0 ** 0 ** USART0_RX + _BV( 1 ) , // PE 1 ** 1 ** USART0_TX + _BV( 4 ) , // PE 4 ** 2 ** PWM2 + _BV( 5 ) , // PE 5 ** 3 ** PWM3 + _BV( 5 ) , // PG 5 ** 4 ** PWM4 + _BV( 3 ) , // PE 3 ** 5 ** PWM5 + _BV( 3 ) , // PH 3 ** 6 ** PWM6 + _BV( 4 ) , // PH 4 ** 7 ** PWM7 + _BV( 5 ) , // PH 5 ** 8 ** PWM8 + _BV( 6 ) , // PH 6 ** 9 ** PWM9 + _BV( 4 ) , // PB 4 ** 10 ** PWM10 + _BV( 5 ) , // PB 5 ** 11 ** PWM11 + _BV( 6 ) , // PB 6 ** 12 ** PWM12 + _BV( 7 ) , // PB 7 ** 13 ** PWM13 + _BV( 1 ) , // PJ 1 ** 14 ** USART3_TX + _BV( 0 ) , // PJ 0 ** 15 ** USART3_RX + _BV( 1 ) , // PH 1 ** 16 ** USART2_TX + _BV( 0 ) , // PH 0 ** 17 ** USART2_RX + _BV( 3 ) , // PD 3 ** 18 ** USART1_TX + _BV( 2 ) , // PD 2 ** 19 ** USART1_RX + _BV( 1 ) , // PD 1 ** 20 ** I2C_SDA + _BV( 0 ) , // PD 0 ** 21 ** I2C_SCL + _BV( 0 ) , // PA 0 ** 22 ** D22 + _BV( 1 ) , // PA 1 ** 23 ** D23 + _BV( 2 ) , // PA 2 ** 24 ** D24 + _BV( 3 ) , // PA 3 ** 25 ** D25 + _BV( 4 ) , // PA 4 ** 26 ** D26 + _BV( 5 ) , // PA 5 ** 27 ** D27 + _BV( 6 ) , // PA 6 ** 28 ** D28 + _BV( 7 ) , // PA 7 ** 29 ** D29 + _BV( 7 ) , // PC 7 ** 30 ** D30 + _BV( 6 ) , // PC 6 ** 31 ** D31 + _BV( 5 ) , // PC 5 ** 32 ** D32 + _BV( 4 ) , // PC 4 ** 33 ** D33 + _BV( 3 ) , // PC 3 ** 34 ** D34 + _BV( 2 ) , // PC 2 ** 35 ** D35 + _BV( 1 ) , // PC 1 ** 36 ** D36 + _BV( 0 ) , // PC 0 ** 37 ** D37 + _BV( 7 ) , // PD 7 ** 38 ** D38 + _BV( 2 ) , // PG 2 ** 39 ** D39 + _BV( 1 ) , // PG 1 ** 40 ** D40 + _BV( 0 ) , // PG 0 ** 41 ** D41 + _BV( 7 ) , // PL 7 ** 42 ** D42 + _BV( 6 ) , // PL 6 ** 43 ** D43 + _BV( 5 ) , // PL 5 ** 44 ** D44 + _BV( 4 ) , // PL 4 ** 45 ** D45 + _BV( 3 ) , // PL 3 ** 46 ** D46 + _BV( 2 ) , // PL 2 ** 47 ** D47 + _BV( 1 ) , // PL 1 ** 48 ** D48 + _BV( 0 ) , // PL 0 ** 49 ** D49 + _BV( 3 ) , // PB 3 ** 50 ** SPI_MISO + _BV( 2 ) , // PB 2 ** 51 ** SPI_MOSI + _BV( 1 ) , // PB 1 ** 52 ** SPI_SCK + _BV( 0 ) , // PB 0 ** 53 ** SPI_SS + _BV( 0 ) , // PF 0 ** 54 ** A0 + _BV( 1 ) , // PF 1 ** 55 ** A1 + _BV( 2 ) , // PF 2 ** 56 ** A2 + _BV( 3 ) , // PF 3 ** 57 ** A3 + _BV( 4 ) , // PF 4 ** 58 ** A4 + _BV( 5 ) , // PF 5 ** 59 ** A5 + _BV( 6 ) , // PF 6 ** 60 ** A6 + _BV( 7 ) , // PF 7 ** 61 ** A7 + _BV( 0 ) , // PK 0 ** 62 ** A8 + _BV( 1 ) , // PK 1 ** 63 ** A9 + _BV( 2 ) , // PK 2 ** 64 ** A10 + _BV( 3 ) , // PK 3 ** 65 ** A11 + _BV( 4 ) , // PK 4 ** 66 ** A12 + _BV( 5 ) , // PK 5 ** 67 ** A13 + _BV( 6 ) , // PK 6 ** 68 ** A14 + _BV( 7 ) , // PK 7 ** 69 ** A15 +}; + +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { + // TIMERS + // ------------------------------------------- + NOT_ON_TIMER , // PE 0 ** 0 ** USART0_RX + NOT_ON_TIMER , // PE 1 ** 1 ** USART0_TX + TIMER3B , // PE 4 ** 2 ** PWM2 + TIMER3C , // PE 5 ** 3 ** PWM3 + TIMER0B , // PG 5 ** 4 ** PWM4 + TIMER3A , // PE 3 ** 5 ** PWM5 + TIMER4A , // PH 3 ** 6 ** PWM6 + TIMER4B , // PH 4 ** 7 ** PWM7 + TIMER4C , // PH 5 ** 8 ** PWM8 + TIMER2B , // PH 6 ** 9 ** PWM9 + TIMER2A , // PB 4 ** 10 ** PWM10 + TIMER1A , // PB 5 ** 11 ** PWM11 + TIMER1B , // PB 6 ** 12 ** PWM12 + TIMER0A , // PB 7 ** 13 ** PWM13 + NOT_ON_TIMER , // PJ 1 ** 14 ** USART3_TX + NOT_ON_TIMER , // PJ 0 ** 15 ** USART3_RX + NOT_ON_TIMER , // PH 1 ** 16 ** USART2_TX + NOT_ON_TIMER , // PH 0 ** 17 ** USART2_RX + NOT_ON_TIMER , // PD 3 ** 18 ** USART1_TX + NOT_ON_TIMER , // PD 2 ** 19 ** USART1_RX + NOT_ON_TIMER , // PD 1 ** 20 ** I2C_SDA + NOT_ON_TIMER , // PD 0 ** 21 ** I2C_SCL + NOT_ON_TIMER , // PA 0 ** 22 ** D22 + NOT_ON_TIMER , // PA 1 ** 23 ** D23 + NOT_ON_TIMER , // PA 2 ** 24 ** D24 + NOT_ON_TIMER , // PA 3 ** 25 ** D25 + NOT_ON_TIMER , // PA 4 ** 26 ** D26 + NOT_ON_TIMER , // PA 5 ** 27 ** D27 + NOT_ON_TIMER , // PA 6 ** 28 ** D28 + NOT_ON_TIMER , // PA 7 ** 29 ** D29 + NOT_ON_TIMER , // PC 7 ** 30 ** D30 + NOT_ON_TIMER , // PC 6 ** 31 ** D31 + NOT_ON_TIMER , // PC 5 ** 32 ** D32 + NOT_ON_TIMER , // PC 4 ** 33 ** D33 + NOT_ON_TIMER , // PC 3 ** 34 ** D34 + NOT_ON_TIMER , // PC 2 ** 35 ** D35 + NOT_ON_TIMER , // PC 1 ** 36 ** D36 + NOT_ON_TIMER , // PC 0 ** 37 ** D37 + NOT_ON_TIMER , // PD 7 ** 38 ** D38 + NOT_ON_TIMER , // PG 2 ** 39 ** D39 + NOT_ON_TIMER , // PG 1 ** 40 ** D40 + NOT_ON_TIMER , // PG 0 ** 41 ** D41 + NOT_ON_TIMER , // PL 7 ** 42 ** D42 + NOT_ON_TIMER , // PL 6 ** 43 ** D43 + TIMER5C , // PL 5 ** 44 ** D44 + TIMER5B , // PL 4 ** 45 ** D45 + TIMER5A , // PL 3 ** 46 ** D46 + NOT_ON_TIMER , // PL 2 ** 47 ** D47 + NOT_ON_TIMER , // PL 1 ** 48 ** D48 + NOT_ON_TIMER , // PL 0 ** 49 ** D49 + NOT_ON_TIMER , // PB 3 ** 50 ** SPI_MISO + NOT_ON_TIMER , // PB 2 ** 51 ** SPI_MOSI + NOT_ON_TIMER , // PB 1 ** 52 ** SPI_SCK + NOT_ON_TIMER , // PB 0 ** 53 ** SPI_SS + NOT_ON_TIMER , // PF 0 ** 54 ** A0 + NOT_ON_TIMER , // PF 1 ** 55 ** A1 + NOT_ON_TIMER , // PF 2 ** 56 ** A2 + NOT_ON_TIMER , // PF 3 ** 57 ** A3 + NOT_ON_TIMER , // PF 4 ** 58 ** A4 + NOT_ON_TIMER , // PF 5 ** 59 ** A5 + NOT_ON_TIMER , // PF 6 ** 60 ** A6 + NOT_ON_TIMER , // PF 7 ** 61 ** A7 + NOT_ON_TIMER , // PK 0 ** 62 ** A8 + NOT_ON_TIMER , // PK 1 ** 63 ** A9 + NOT_ON_TIMER , // PK 2 ** 64 ** A10 + NOT_ON_TIMER , // PK 3 ** 65 ** A11 + NOT_ON_TIMER , // PK 4 ** 66 ** A12 + NOT_ON_TIMER , // PK 5 ** 67 ** A13 + NOT_ON_TIMER , // PK 6 ** 68 ** A14 + NOT_ON_TIMER , // PK 7 ** 69 ** A15 +}; + +#endif + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_HARDWARE Serial +#define SERIAL_PORT_HARDWARE1 Serial1 +#define SERIAL_PORT_HARDWARE2 Serial2 +#define SERIAL_PORT_HARDWARE3 Serial3 +#define SERIAL_PORT_HARDWARE_OPEN Serial1 +#define SERIAL_PORT_HARDWARE_OPEN1 Serial2 +#define SERIAL_PORT_HARDWARE_OPEN2 Serial3 + +#endif diff --git a/Other Useful Files/uno_nano_pins_arduino.h b/Other Useful Files/uno_nano_pins_arduino.h new file mode 100644 index 0000000..2ea0190 --- /dev/null +++ b/Other Useful Files/uno_nano_pins_arduino.h @@ -0,0 +1,254 @@ +/* + pins_arduino.h - Pin definition functions for Arduino + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2007 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA +*/ + +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include + +#define NUM_DIGITAL_PINS 20 +#define NUM_ANALOG_INPUTS 6 +#define analogInputToDigitalPin(p) ((p < 6) ? (p) + 14 : -1) + +#if defined(__AVR_ATmega8__) +#define digitalPinHasPWM(p) ((p) == 9 || (p) == 10 || (p) == 11) +#else +#define digitalPinHasPWM(p) ((p) == 3 || (p) == 5 || (p) == 6 || (p) == 9 || (p) == 10 || (p) == 11) +#endif + +#define PIN_SPI_SS (10) +#define PIN_SPI_MOSI (11) +#define PIN_SPI_MISO (12) +#define PIN_SPI_SCK (13) + +static const uint8_t SS = PIN_SPI_SS; +static const uint8_t MOSI = PIN_SPI_MOSI; +static const uint8_t MISO = PIN_SPI_MISO; +static const uint8_t SCK = PIN_SPI_SCK; + +#define PIN_WIRE_SDA (18) +#define PIN_WIRE_SCL (19) + +static const uint8_t SDA = PIN_WIRE_SDA; +static const uint8_t SCL = PIN_WIRE_SCL; + +#define LED_BUILTIN 13 + +#define PIN_A0 (14) +#define PIN_A1 (15) +#define PIN_A2 (16) +#define PIN_A3 (17) +#define PIN_A4 (18) +#define PIN_A5 (19) +#define PIN_A6 (20) +#define PIN_A7 (21) + +static const uint8_t A0 = PIN_A0; +static const uint8_t A1 = PIN_A1; +static const uint8_t A2 = PIN_A2; +static const uint8_t A3 = PIN_A3; +static const uint8_t A4 = PIN_A4; +static const uint8_t A5 = PIN_A5; +static const uint8_t A6 = PIN_A6; +static const uint8_t A7 = PIN_A7; + +#define digitalPinToPCICR(p) (((p) >= 0 && (p) <= 21) ? (&PCICR) : ((uint8_t *)0)) +#define digitalPinToPCICRbit(p) (((p) <= 7) ? 2 : (((p) <= 13) ? 0 : 1)) +#define digitalPinToPCMSK(p) (((p) <= 7) ? (&PCMSK2) : (((p) <= 13) ? (&PCMSK0) : (((p) <= 21) ? (&PCMSK1) : ((uint8_t *)0)))) +#define digitalPinToPCMSKbit(p) (((p) <= 7) ? (p) : (((p) <= 13) ? ((p) - 8) : ((p) - 14))) + +#define digitalPinToInterrupt(p) ((p) == 2 ? 0 : ((p) == 3 ? 1 : NOT_AN_INTERRUPT)) + +#ifdef ARDUINO_MAIN + +// On the Arduino board, digital pins are also used +// for the analog output (software PWM). Analog input +// pins are a separate set. + +// ATMEL ATMEGA8 & 168 / ARDUINO +// +// +-\/-+ +// PC6 1| |28 PC5 (AI 5) +// (D 0) PD0 2| |27 PC4 (AI 4) +// (D 1) PD1 3| |26 PC3 (AI 3) +// (D 2) PD2 4| |25 PC2 (AI 2) +// PWM+ (D 3) PD3 5| |24 PC1 (AI 1) +// (D 4) PD4 6| |23 PC0 (AI 0) +// VCC 7| |22 GND +// GND 8| |21 AREF +// PB6 9| |20 AVCC +// PB7 10| |19 PB5 (D 13) +// PWM+ (D 5) PD5 11| |18 PB4 (D 12) +// PWM+ (D 6) PD6 12| |17 PB3 (D 11) PWM +// (D 7) PD7 13| |16 PB2 (D 10) PWM +// (D 8) PB0 14| |15 PB1 (D 9) PWM +// +----+ +// +// (PWM+ indicates the additional PWM pins on the ATmega168.) + +// ATMEL ATMEGA1280 / ARDUINO +// +// 0-7 PE0-PE7 works +// 8-13 PB0-PB5 works +// 14-21 PA0-PA7 works +// 22-29 PH0-PH7 works +// 30-35 PG5-PG0 works +// 36-43 PC7-PC0 works +// 44-51 PJ7-PJ0 works +// 52-59 PL7-PL0 works +// 60-67 PD7-PD0 works +// A0-A7 PF0-PF7 +// A8-A15 PK0-PK7 + + +// these arrays map port names (e.g. port B) to the +// appropriate addresses for various functions (e.g. reading +// and writing) +const uint16_t PROGMEM port_to_mode_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &DDRB, + (uint16_t) &DDRC, + (uint16_t) &DDRD, +}; + +const uint16_t PROGMEM port_to_output_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PORTB, + (uint16_t) &PORTC, + (uint16_t) &PORTD, +}; + +const uint16_t PROGMEM port_to_input_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PINB, + (uint16_t) &PINC, + (uint16_t) &PIND, +}; + +const uint8_t PROGMEM digital_pin_to_port_PGM[] = { + PD, /* 0 */ + PD, + PD, + PD, + PD, + PD, + PD, + PD, + PB, /* 8 */ + PB, + PB, + PB, + PB, + PB, + PC, /* 14 */ + PC, + PC, + PC, + PC, + PC, +}; + +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { + _BV(0), /* 0, port D */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(6), + _BV(7), + _BV(0), /* 8, port B */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(0), /* 14, port C */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), +}; + +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { + NOT_ON_TIMER, /* 0 - port D */ + NOT_ON_TIMER, + NOT_ON_TIMER, + // on the ATmega168, digital pin 3 has hardware pwm +#if defined(__AVR_ATmega8__) + NOT_ON_TIMER, +#else + TIMER2B, +#endif + NOT_ON_TIMER, + // on the ATmega168, digital pins 5 and 6 have hardware pwm +#if defined(__AVR_ATmega8__) + NOT_ON_TIMER, + NOT_ON_TIMER, +#else + TIMER0B, + TIMER0A, +#endif + NOT_ON_TIMER, + NOT_ON_TIMER, /* 8 - port B */ + TIMER1A, + TIMER1B, +#if defined(__AVR_ATmega8__) + TIMER2, +#else + TIMER2A, +#endif + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, /* 14 - port C */ + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, +}; + +#endif + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_HARDWARE Serial + +#endif -- 2.39.2